Angle Application

Home >>  Systems >>  Suspension Clamp System >>  Angle Application

End Suspension Clamps anchor the ends of back-to-back angles to the top or bottom joist flange. Midspan Suspender Clamps are installed along the angle span to hang objects such as ceiling fixtures, conveyers, or HVAC equipment from threaded rods. Suspension Clamps can be used to form Panel Point Bridges for transferring of loads to panel points. Customer is to supply Angles. Suspension Clamps have 11/16” holes for 5/8” threaded rods (purchase separately).

Diagram of Midspan and End Suspension Clamps used in angle applications, illustrating their installation with hanger rods for supporting ceiling fixtures and HVAC equipment.
Suspension clamps installed on structural beams, featuring yellow components for secure attachment and support of hanging objects in construction applications.