Home  >>  About Us  >>  Testimonials

Tube Framing Clamp System

Aramark Uniform Services has used the Tube Framing Clamp System for providing the deck support on six different roof openings at our facility in Toledo, Ohio. Each set-up was easy to install and went up quicker than I expected. The fact that we did not have to weld your system in place was a main factor in our decision. It allowed for our operations to continue during construction with very limited interruption.-William Saba, Aramark Uniform Services
We have used the Tube Clamp System on two jobs now and are getting ready to place our third order. This product has substantially cut down the installation, layout and ordering time usually required to provide structural support for the mechanical systems we install. No prefabrication required. No drilling or welding required in the field. When I first saw the system I could see how good it would work for us. It is easily saving us 50% or more over previous costs.-Russell Geiger, TEMCO

Our field personnel stated that the frames we purchased from you went in pretty easily, and it took a lot less time than a typical frame. Your frame setup worked perfectly for our application.-Benji Presser, icon Mechanical
Just wanted to let you know that everything went extremely well with the installation of the Chicago Clamp System for the 15 ton RTU. Thank you for your help and we look forward to using your system on future projects.-Joseph Smedley, Moyer Indoor Outdoor
The guys in the field, they loved that system and it went very well. We would love to use that again some time. I’ll put your name in my rolodex.-Jill Richter, Total Mechanical
We had great feedback from the field. Thanks for your help with this job. We look forward to working with you again.-Pat Heywood, GT Mechanical Projects & Design, Inc
Thanks for getting the material to me as fast as you did. That stuff works great!!!-Jesse Rippe, Arctic Engineering Co Inc.
We had no problems and we will recommend your system when we can.-Stan Haberski, Bonazzoli Corp.
That’s reasonably priced for what it does. It saves you an unbelievable amount in man power.-Tony Souza, Westmont Engineering Co
Installation was a breeze and rooftop is in place. My people really liked the quality of your product and made sure to let me know that they prefer this method of support in lieu of all that goes into welding, fire watch, tarp protection and such.-Brian Crispin, All Seasons Mechanical
We love these things.-Lee Bristow, A&S Steel

3 Inch Tube Framing Clamp System

Everything went fine with your product. The Chicago Clamp system is a great system. My men were really impressed with how easy and quick of a task it was to complete. Everyone from owner, MEP contractor, architects, project managers, were really impressed. It was a homerun for my project. Thank you again.-Jim Dewitt, Mascaro Construction Co
With the Chicago Clamp System, we save money, period. There’s no need for time consuming welds on steel framing, the clamp system is affordable, and installs quickly (and easily).-Bill Burns, S.P. McCarl & Co

Received the shipment late Monday started installing first thing Tuesday morning and was complete by 9:00 coffee break. Amazing product, especially in the health care field where welding is not an option. Will definitely use this again if the circumstances arise.

Thank you again for your prompt service and shipping. Everything worked out great.-Matt Giosa, Canuso Jorden General Contractors & Construction Mangers

We will definitely be using this system again. Installation under an existing roof deck was easy & fast. Our iron workers loved it. -Paul Giese, Fowler & Hammer

Tube Framing Clamp System with Girder Clamps

Everything worked out great. St. Louis County actually preferred your product since it had documentation to back it up. We will continue to use your product in the future.-Mike Brinkmann, Midwest Mechanical Solutions
We discovered Chicago Clamp after working on a jobsite that required additional structural steel support. Usually, this is not a well-liked part of our projects, yet, our field staff insisted we keep the contact information for the next time supports were needed on a job. It’s so rare they come into the office and really like something, yet the Chicago Clamp systems fit well, were easy to use and they made for a “good job.” Anything that make the guys happy makes me happy!-Rebekah Wright, Wright Heating

Joist Grip Framing Clamp System

Great product. Much better alternative to installing and welding steel angles to support RTU units. Kevin Barry (Sales Manager) was extremely helpful and knowledgeable about the product and was able to turn around a quote same day. When it came to ordering it, he had it processed and shipped within a couple days, and it arrived on site in Texas within 3 business days. Once on site, the product only took our superintendent a little over an hour to install. All around great product, and if your local inspector will allow this alternative method of RTU support, you would be crazy not to use this product.-Anthony M Laudonio, Lakeview Construction, Inc
Thank you, exactly what we needed, have no doubt as applications arise you will hear from us. Your system is so much easier than welding steel framework , there is no comparison. Most of our work is service related, in operating buildings, we can come in on a weekend, install your system and have the new a/c running by Monday with no “Hot work”, or disturbance of the office. This capability has landed us jobs!-Choya Dalton, Airite Air Conditioning, Inc

Channel Framing Clamp System

Ordering and timely delivery were great on my end. It’s a great product and we will use it again when we have a similar situation on the job site. Thanks again.-William Galligan, Amaral Associates